Tag Archives: planetary gear transmission

China Custom Maintenance Free Stainless Steel Transmission Gear Motor Speed Reducer Planetary Gearbox Decelerator aluminum worm gearbox

Product Description

Product Description

maintenance free stainless steel transmission gear motor speed reducer planetary gearbox decelerator

HangZhou Fubao Electromechanical Technology Co., Ltd. gear motor speed reducer planetary gearbox decelerator is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

gear motor speed reducer planetary gearbox decelerator characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the gear motor speed reducer planetary gearbox decelerator. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

Compared with other reduction machines, gear motor speed reducer planetary gearbox decelerator machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,gear motor speed reducer planetary gearbox decelerator is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

 

WVB/WVBL series parameters Model number WVB042/WVBL50 WVB60/WVBL70 WVB/WVBL90 WVB/WVBL120 WVB142/WVBL155 WVB180/WVBL205 WVB220/WVBL235
Rated output torque 13-17Nm 32-48Nm 80-125Nm 165-265Nm 280-530Nm 480-960Nm 900-1360Nm
Reduction ratio L1: 3, 4, 5, 7, 10 L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100
Planetary gear backlash L1: P1≤3 P2≤5  L2: P1≤5 P2≤7

 

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Pipe Bending Machine
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Customization:
Available

|

worm reducer

Worm gear reducer gearbox

A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm reducer

application

The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China Custom Maintenance Free Stainless Steel Transmission Gear Motor Speed Reducer Planetary Gearbox Decelerator   aluminum worm gearboxChina Custom Maintenance Free Stainless Steel Transmission Gear Motor Speed Reducer Planetary Gearbox Decelerator   aluminum worm gearbox
editor by CX 2023-05-31

China Power Transmission Worm Spur Helical Planetary Agricultural Worm Gearbox Speed Reducer Gear Motor Worm Reducer Gearbox Studios Gearbox Manufacturer worm gearbox angle

Product Description

Electricity Transmission Worm Spur Helical Planetary Agricultural Worm Gearbox Pace Reducer Gear Motor Worm Reducer Gearbox Studios Gearbox Maker

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

What is a worm gear reducer gearbox?

The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm reducerHollow shaft worm gear reducer gearbox

Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear

The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
worm reducerBrass worm gear

Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Power Transmission Worm Spur Helical Planetary Agricultural Worm Gearbox Speed Reducer Gear Motor Worm Reducer Gearbox Studios Gearbox Manufacturer     worm gearbox angleChina Power Transmission Worm Spur Helical Planetary Agricultural Worm Gearbox Speed Reducer Gear Motor Worm Reducer Gearbox Studios Gearbox Manufacturer     worm gearbox angle
editor by czh 2023-01-05

in Salta Argentina sales price shop near me near me shop factory supplier Spur Starter Drive Planetary Transmission Reduction Precision Pinion Gear manufacturer best Cost Custom Cheap wholesaler

  in Salta Argentina  sales   price   shop   near me   near me shop   factory   supplier Spur Starter Drive Planetary Transmission Reduction Precision Pinion Gear manufacturer   best   Cost   Custom   Cheap   wholesaler

Our business pays specific interest to customers’ wants, listening to the specific specifications of each and every consumer and guaranteeing overall satisfaction. In this way, our products have continued to obtain market acceptance and buyers gratification over the past few years. We are looking forward to developing effective business relationships with new consumers all around the entire world in the long term.

Product Info
EPTXiHu (West Lake) Dis.ng Large EPT Customized Machining Spur Equipment
Equipment EPT refers to the unit that transmits movement and EPT from the EPT pair. It is the most widely utilised mechanical EPT approach in modern day equipment. Its EPT is far more exact, high effectiveness, compact structure, reputable procedure and EPT service daily life.Our EPTs can be warmth handled, hardened, oil immersed according to consumer demands.The EPT is widely utilized in business, car, EPT tools, motor, bicycle, electrombile.

We can make customers’ satisfactory merchandise in accordance to the samples or drawings supplied by customers. For the completion of a merchandise, we also need to know its material, warmth treatment demands and area remedy needs. We are a manufacturing facility with forty a long time of production expertise, welcome to seek the advice of.
The benefit of our EPT
one Vast selection of relevant peripheral speeds and EPTs.
two The EPT ratio is accurate, secure and efficient.
three Reputable performance and EPT support daily life.

EPTngyin EPTXiHu (West Lake) Dis.ng EPTry EPT Co., Ltd. is a EPTized provider of a full assortment of motor shafts, EPTs, Flanges(Couplings), EPT racks, sprockets, pulley, EPTd parts and so on.

Owing to our sincerity in providing best services to our clients, understXiHu (West Lake) Dis.Hu (West Lake) Dis. of your needs and overriding feeling of duty towards filling ordering specifications, we have acquired the EPT of consumers around the world. Obtaining gathered precious knowledge in cooperating with foreign customers, our merchandise are marketing well in the American, European, South American and Asian markets.Our products are made by modern computerized EPTry and products. In the meantime, our merchandise are manufactured in accordance to large quality stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds, and complying with the global EPT stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd criteria.

With several years’ encounter in this line, we will be EPTed by our advantages in competitive price, 1-time delivery, prompt response, on-hand engineering assistance and great right after-income solutions.

Furthermore, we also can design and style and make non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd products to meet up with customers’ EPT demands. EPT and credit are the bases that make a corporation alive. We will offer best companies and higher quality products with all sincerity. If you need any details or samples, you should get in touch with us and you will have our quickly reply.

FAQ
1)Are you investing firm or maker?
We are factory.

2)How can I customise my products?
Connect your drawing with details(area therapy,materials,quantity and EPT needs and so forth.)

3)How EPT can I get the quotation?
We will give you the quotation within 48 several hours(thinking about the time variation)

4)How EPT will you produce the areas?
EPTly it is 5-10 daEPTif the items are in inventory. Or it is fifteen-twenty five daEPTif the merchandise are not in stock, it really is in accordance to amount.

5)Do you offer samples? Is it free or added?
Yes, we could provide the sample, the samples and delivery EPTs need to be borne by the consumer.

six)What is your phrases of payment?
Payment le1000 USD, 100% EPT. Payment ge1000 USD, 30% T/T EPT, stability before cargo. If you have any inquiries, please will not be reluctant to contact us.

7)What if the products we EPTd are not excellent?
Speak to us with no hesitation, our EPT soon after-product sales services will consider the duty.

  in Salta Argentina  sales   price   shop   near me   near me shop   factory   supplier Spur Starter Drive Planetary Transmission Reduction Precision Pinion Gear manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Salta Argentina  sales   price   shop   near me   near me shop   factory   supplier Spur Starter Drive Planetary Transmission Reduction Precision Pinion Gear manufacturer   best   Cost   Custom   Cheap   wholesaler

Best China manufacturer & factory factory in Ibb Yemen manufacturer for custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

“We are always serving our customers with our best products.”

Overview

Quick Details

Applicable Industries:

Manufacturing Plant

Main products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.

Local Service Location:

None

Surface treatment:

Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating

Certificate:

ISO/TS16949:2009

Standard:

DIN, ISO/GB, AGMA, JIS,ISO/TS16949:2009

Module:

M1-M8

Standard or Nonstandard:

Nonstandard

Tolerance:

Outer Diameter Based on drawingLength Dimension

Heat treatment:

Quenching & Tempering, Carburizing & Quenching

Pressure Angle:

20/40/50/60 Customized

Supply Ability

Supply Ability:
5000 Piece/Pieces per Month

Packaging & Delivery

Packaging Details
Neutral paper packaging, wooden boxes for outer box or according to customer’s demand.
Port
Shanghai / Ningbo
Lead Time
:
The star tube is suitable for applications with high torque peaks that could be harmful to the other tube shapes. The star tube with 6 contact points is also the preferred choice when transmissions exceed 1600mm in length and when the speed is 1000 rpm. AG series with splined tube The splined tube is suggested for very short PTO shafts. The splined telescopic shaft allows bushing and splined couplings of only 100-120mm. The dimensions of the cross joints vary from 22mm diameter up to 48mm diameter and allow power transmission of up to 250HP.

Quantity(Pieces) 1 – 1000 >1000
Est. Time(days) 15 To be negotiated

Online Customization

A rough shaft surface accelerates seal wear. But a finished surface that is too smooth will not support hydrodynamic lubrication of the seal lip. Most oil-seal manufacturers recommend shaft surface roughness between 10 and 20-m in. Ra.

We Ever-Power Group with 4 branches over 1200 workers is one of the biggest transmission parts and machining items manufacturers in China factory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear

Product Description

custom high quality forged alloy steel transmission steel bevel differential planetary gear

(1). All kinds of gears, shaft, gear shaft, precision gear and CNC gear.
 (2). Specialized in manufacturing all kinds of automobile transmission part based on  drawings
 (3). Material: ductile cast iron, carbon steel, alloy steel , stainless steel, , bronze/brass
 (4). Modules: M1 to M8 
 (5). Meets ISO, DIN and ASTM standards 
 (6). Specification : According to the the drawing

Material

 Carbon Steel

 SAE1020, SAE1045, Cr12, 40Cr, Y15Pb, 1214Letc

 Alloy Steel

 20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5etc

 Brass/Bronze

 HPb59-1, H70, CuZn39Pb2, CuZn40Pb2, C38000, CuZn40etc

Tolerance Control

Outer Diameter

 Based on drawing

Length Dimension

 Based on drawing

Machining Process

Gear Hobbing, Gear Milling, Gear Shaping, Gear Broaching, Gear Shaving, Gear Grinding and Gear Lapping

Teeth Accuracy

DIN Class 4, ISO/GB Class 4, AGMA Class 13, JIS Class 0

Modules

1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5….8.0 etc

Heat Treatment

Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding

Surface Treatment

Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating

Standard

1. DIN, ISO/GB, AGMA, JIS,ISO/TS16949:2009

factory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gearfactory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gearfactory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gearfactory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gearfactory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gearfactory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear

Packaging & Shipping

 factory manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price

Best China manufacturer & factory factory  in Ibb Yemen  manufacturer for  custom high quality forged alloy steel transmission steel bevel differential planetary gear With high quality best price