We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
1ton, 2Ton Design Developing Lifter / EPT / Hoist:
one. SC Sequence constructing Design hoist, is a type of rack and pinion construction hoist, also known as rack and pinion carry, design lift, construction elevator, and so on.
two.HSJJconstruction hoi EPT (building elevator/construction lifter) adopts rack and pinion transmission primarily based on domestic and foreign advanced technologies, by means of several many years of innovation and improvement.
3.. Ma EPT part can be divided into 3 requirements as follows: 650x650x1508, 800x800x1508
4. Driving method: SCD twin travel, counter fat, no counter fat of SC triple travel, created-in, upper-setting and frequency management etc.
five. HSJJ construction hoists (construction lifters/building elevators) are relevant to bridges, chimneys, buildings and a lot of EPT projects.
SC200 / 200 construction hoi EPT specialized efficiency parameters
| Performance parameters | Model | SC200/two hundred | SC200/200A | |
| Rated load (KG) |
2000×2 | 2000×2 | ||
| Rated number of occupants (Individuals) |
12×2 | 12×2 | ||
| Rated lifting velocity (m/min) |
33.4 | 33.4 | ||
| Maximum lifting peak (m) |
a hundred and fifty | 150 | ||
| Rail body dimension (m) |
.65×0.65×1.508 | .65×0.65×1.508 | ||
| Cage Measurement (m) |
3.0×1.3×2.5 | three.2×1.5×2.five | ||
| Electric motor | Power(KW) | a | 11KW x three | 11KW x 3 |
| b | 18KW x 2 | 18KW x 2 | ||
| Reducer |
Composition | Turbine shaft | Turbine shaft | |
| Drive ratio | 1:sixteen | one:16 | ||
|
Basic safety gadget |
Model | SAJ40-1.2A | SAJ40-1.2A | |
| Form | Progressive | Progressive | ||
| Rated working velocity(m/s) | 1.two | 1.two | ||
| Rated brake load(KN) | 40 | forty | ||
| Stop layer method | a | Automated | Automatic | |
| b | Manually | Manually | ||
| Growth | Rated load | 180KG | 180KG | |
Main characteristic:
one.Transmission with three push or two generate sort, so that the gear rack force uniform, safe and steady.
two.In buy to ensure the protected procedure of the carry, the circuit is set overload, the pace restrict and EPT basic safety swap, when the event of procedure, the lift instantly and immediately electrical power down, to stay away from accidents.
3.Each and every cage is outfitted with anti-fall basic safety system, it can be extremely effective to stop the slipping cage, to make sure safe and trustworthy operation of the carry.
4.Every cage is outfitted with sophisticated digital sensing overload limiter, to steer clear of lifting products due to overloading induced by products and personalized incident.
5.Lifting line electrical control program is basic, easy to manipulate, repair and servicing. Optional floor pager, simple to use and rapid.
Reliable product quality, competitive price tag guarantee minimum marketplace, Welcome partners to strategy to examine, examine in design creating lifting tools, business negotiations, and sample processing, in purchase to have a wonderful potential and a harmonious ralationship.
one. Staff and materia EPT development developing lifting equipment of frequent designs:
Solution Information
A. Producing process: Rigid substance assortment- blanking- inspection – welding-inspection- Blasting – inspection -Baking completed or galvanized- inspection -Completed merchandise
The item can be personalized in accordance to customers’requirements (drawing, requirements and so on).
B. Unique design for Cage :
one. base and roof of Cage adopt trapezoidal frame
two. Bottom and the roof are full symmetry
3. The airplane of symmetry are connected by Bending plate, Bending channel and square pipe which make it firm, straight and balance in use.
four. The wall around cage can be fastened by Punched Aluminium plate, Punched zinc plate, metal wire mesh.
five. Area Treatment: Blasting, Baking concluded,Galvanized
C. Workshop Detai EPT and Transport Specifics:
1. All Production Line adopt regular of the fixture, mould, gauge
2. Every Development Elevate should be tests-run and adjustment in Factory
3. Workshop 5S mangement style
The use of original equipment manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the outlined substitute components contained herein are not sponsored, accepted, or manufactured by the OEM.
